The installation method of the pole wheel is relatively simple and mainly used on mesh vehicles. When installing, insert the caster rod directly into the wire rod tube, so that the rod buckle can grip the lean pipeline rod.
2. The installation of screw wheels is also a relatively simple type, which requires installation together with copper sleeves. First, insert the copper sleeve into the lean tube, and then rotate and twist the casters into the copper sleeve.
3. The top of the flat wheel is flat, making the contact surface between the caster and the wire rod large, mainly used for heavy-duty turnover vehicles. It needs to be installed together with two sets of caster upper and lower clamps. The installation method includes placing an upper clamp plate between two wire rods, aligning a lower clamp plate directly below the upper clamp plate, placing the casters at the bottom of the clamp plate, and then threading screws through the screw holes on the caster bracket and the lower upper clamp plate in sequence. Finally, tighten the nuts.
4. The expansion wheel is mainly used on turnover vehicles with light load-bearing capacity and needs to be installed with a hexagonal wrench. The installation method is to insert the screw part of the caster into the wire rod and tighten the screw with a hexagonal wrench.
Contact person: Kalisa
400: +86 400-8055-828
Tel: +86-755-29554900
Mobile phone: +86 15919917235
E-mail: service@szsunqit.com
Add: Block3# HongTianFu Industry Park GuanGuang RD. Dashuikeng Community FuCheng Street LongHua District Shenzhen China.