What is the process of lean workbench assembly?

The assembly process of the lean workbench primarily includes steps such as design planning, material preparation, cutting pipes, deburring, frame assembly, and functional component installation, with the entire process emphasizing modularity, flexibility, and reusability.

1. Material Preparation

· Lean tube: Commonly used with an outer diameter of 28mm, available in colors such as beige, white, and anti-static black. The standard length is 4 meters per piece, which can be cut as needed;

- Connection fittings: Used to connect pipes, commonly including right-angle elbows, tees, crosses, and adjustable couplings;

· Tabletop: Optional materials include composite panels, anti-static panels, stainless steel panels, etc., selected based on the usage environment;

· Other accessories: casters, adjustable feet, lighting system, power strip, drawers, sliding rails, etc.

2. Cutting the pipe material

Mark the cutting position on the pipe with a pen according to the design dimensions;

· Perform vertical cutting with a professional manual cutter to ensure a smooth cut surface;

Pre-cut standard lengths (such as 30cm, 60cm, 1.2m, etc.) are also available on the market and can be directly selected.

3. Frame Assembly

The assembly sequence is typically as follows:

· Front foot fabrication: Insert the joint into the pipe, assemble two front uprights, and bond them firmly;

· Back foot production: Create one on each side, leaving them unattached for easy adjustment later;

· Connect the front and rear feet: Use a horizontal pipe to connect the front and rear feet, forming two side frames;

Connect both sides: Use the top and bottom cross tubes to join the left and right frames, forming a complete rectangular structure;

· Install the support connector: Attach the sheet support connector to the top of the four columns to support the countertop panel.