How to maintain the workbench after cleaning in an electronics factory?

The maintenance of workbenches in electronic factories (especially anti-static workbenches) after cleaning primarily involves preserving anti-static performance, preventing contamination, ensuring structural stability, and guaranteeing electrical safety. Based on the latest publicly available information (as of April 2026) and practical usage scenarios in electronic factories, the following maintenance methods are recommended:

1. Key Points for Post-Cleaning Maintenance

1. Avoid using corrosive or solvent-based cleaners;

After cleaning, the use of household or strong solvent-based cleaners such as alcohol, acetone, ethyl acetate, dishwashing liquid, and glass cleaner is strictly prohibited, as these can damage the anti-static coating on the surface and lead to permanent performance degradation.

2. Use a dedicated anti-static cleaning agent;

Use a neutral, ESD-specific cleaner in conjunction with microfiber or lint-free soft cloth to wipe the work surface, applying uniform motion in one direction to avoid residue.

3. Thoroughly dry;

After cleaning, allow it to air dry naturally or wipe it dry with another clean cloth to ensure the surface is free of moisture, preventing static electricity from attracting dust or causing short circuits.

4. Regularly inspect the anti-static performance;

It is recommended to test the surface resistance and electrostatic dissipation performance of workbenches or tabletops every 3–6 months. If they fail to meet ESD standards, they should be replaced promptly.

5. Keep the environment clean and dry;

The workbench in the electronics factory should be placed in a controlled temperature and humidity environment with low dust levels to prevent contamination from dust, oil stains, and chemical gases, which could affect the anti-static effect.