loading

What anti-static measures should be taken for the lean management workbench in a dust-free workshop?

The key to anti-static in the lean pipe workbench in the dust-free workshop is to have all four aspects in place: countertop, grounding, accessories, and maintenance, all of which are indispensable. The focus is not just on anti-static measures for the countertop, but on forming a complete static discharge system for the entire workstation.

What anti-static measures should be taken for the lean management workbench in a dust-free workshop?

1、 Core anti-static indicators
1. Surface resistance of the countertop: It should be maintained between 10 ⁶ and 10 ⁹ Ω, according to SJ/T 10694-2006 standard. Highly sensitive devices (such as ICs and chips) are recommended to be selected between 10 ⁶ and 10 ⁸ Ω.
2. Grounding resistance: The grounding resistance of the workbench should be ≤ 100 Ω, and it is recommended to be ≤ 10 Ω in high-risk areas; The resistance value of the countertop to ground should be between 1.0 × 10 ⁵ Ω and 1.0 × 10 ⁹ Ω.
3. Workshop environment: The relative humidity in the electronic workshop is generally controlled at 45% to 60%, and low humidity can easily generate static electricity.
2、 Selection and Configuration Points
1. Framework material: Anti static black plastic coated tube is selected, which does not fall off dust or produce chips, and meets the cleanliness requirements of a dust-free workshop.
2. Tabletop material: Lay anti-static rubber or anti-static fireproof board, smooth and easy to wipe, without dust accumulation.
3. Grounding system: The bottom copper foil is connected to the workshop common grounding point through a grounding wire, and must be connected to the equipotential grounding network, not just grounded. Wall panels, metal door frames, equipment brackets, etc. should all be connected to the equipotential grid.
4. Attachment configuration: Anti static hooks, anti-static parts boxes, anti-static sponge trays, wrist strap sockets, etc. should all be made of anti-static materials with a resistance of 10 ⁶ -10 ⁹ Ω.
5. Auxiliary equipment: Install ion fans if necessary to neutralize static electricity; Lighting recommendation: 5000K color temperature and illuminance ≥ 500Lux.
3、 Daily maintenance precautions
1. Cleaning method: Wipe the countertop with anti-static cleaner daily, and avoid alcohol as it may damage the anti-static layer.
2. Inspection cycle: After the first qualified inspection of the new installation, it shall be re inspected every six months; It is recommended to conduct testing every 3-6 months for electronic manufacturing/high-risk environments.
3. Grounding inspection: Check the grounding wire connection, wrist strap socket function, and ion fan cleaning every month.
4. Cleaning table mats: Dilute neutral detergent with water to clean anti-static table mats and floor mats; The building floor should be treated with anti-static solution once a week.
Key tests during acceptance include surface resistance (five point method detection), grounding resistance, frame levelness (≤ 2mm/m), and lighting illumination (≥ 500Lux).
If dealing with high static sensitive components such as chips and PCBs, it is recommended to configure an ion fan and choose a countertop with 10 ⁶ -10 ⁸ Ω, which can reduce the static damage rate by more than 90%.

prev
How to customize a wire rod workbench that fits the assembly line?
What is the composite pipe?
next
recommended for you
Get in touch with us
SUNQIT focus on the R&D and manufacturing of standard spare parts for lean equipment, Research on Low-Cost Intelligent Automation Application Scenarios depend on the Manufacturing site. 
Contact with us

Contact person: Kalisa

400: +86 400-8055-828 

Tel: +86-755-29554900 

Mobile phone: +86 15919917235 

E-mail: service@szsunqit.com 

Add: Block3# HongTianFu Industry Park GuanGuang RD. Dashuikeng Community FuCheng Street LongHua District Shenzhen China.

Copyright © 2026  Shenzhen Sunqit Electronics Technology Co., Ltd. | Sitemap

Customer service