Lean pipes need to be designed with load capacity in mind. Strength can be increased by adding fulcrum, connecting parts and parallel use of double cladding plastic pipes. When designing the structure, make sure that the main load is applied directly to the pipe fittings and not to the connections.

　　The maximum horizontal distance is every 600mm (according to the specific weight of the design of the specific structure) can be built at will, using block type assembly, must be vertical with the ground column support, and every 1200mm, vertical column should be directly to the ground. In the case of products with casters, the underframe shall be of double rod parallel construction. The horizontal distance is 600mm, and the safety bearing of a single rod and slide is 30kg. A whole plastic covering than by the collet string up a few plastic tube strength is stronger, so in the plastic covering tube selection, the stress rod must be the whole rod, the connecting rod can be segmenting.



　　When designing a rod product, the usage should be considered in detail. If it does not need to move, try not to design a product with casters. Line bar products are also known as flexible, according to your site conditions and customer requirements, comprehensive design scheme, flexible disassembly and installation, no welding, practical, automotive, electronics, printing, clothing, dust workshop, installation is more health, no pollution.

　　The width of each column of the sliding shelf (center distance) is the width of the turnover box placed +60mm; The height of each floor is +50mm of the height of the turnover box placed. The determination of the slope Angle of the slide, the general slope Angle of the slide is 5~8 degrees, when placing precision materials, heavy materials and the bottom of the turnover box is smooth, the slope Angle should be smaller.

　　Description:

　　The aluminum pipe is a new product that has appeared on the market in recent years.

　　It is a 6005T6 series aluminum alloy lean pipe， which developed based on the composite pipe and made of aluminum alloy material by high temperature and high- pressure extrusion molding process.

　　The pipe has a strong carrying capacity and stable product performance, it mainly used in the rapid assembly of the assembly line and lean production equipment.

　　The application of the aluminum tube 'Kaizen' pipe racking system in the field of the lean tube, which is a major innovation in the field of the lean pipe.

　　Features：

　　1. Environmental protection, simplicity, speed, and low cost. It also meets the 'Kaizen' pipe racking system, JIT production model. And a flexible pipe racking system can improve work efficiency.

　　2. It is ergonomic and convenient to adjust the height of the flexible pipe racking system appliance.

　　Such as workbenches, material turnover vehicles, shelves, unpowered assembly line and lean production equipment, etc.

　　Advantage :

　　1. Aluminum pipe material is light and rigid, strong load-bearing capacity, anti-corrosion, and anti-rust.

　　2. There are various types of aluminum wire rod connectors, which are easy to be assembled, convinent, and beautiful.

　　3. Representative of modern flexible production lines, the assembly efficiency has been greatly improved compared with the previous ordinary pipe of products.

　　Appliances：

　　1. Used for flexible production line materials, packaging production lines, flexible pipe racking system, and workstation application.

　　2. The use of workbenches in each production line and the use of sorting products.

　　3. Supermarket merchandise display racks, personalized display racks.

　　4. Multi-layer material loading vehicles, temporary storage vehicles, and specially designed mobile devices.

　　5. Use of storage shelves, medium, and light multi-layer shelves.

　　6. 'Kaizen' pipe racking system.

Lean pipe has been widely used in the world. Its outer layer has plastic coating layer, the middle is a metal layer, and the inner layer is an anti-rust layer. This kind of lean pipe has low cost, but strong practicability, and it is an essential basic material for logistics industry and manufacturing industry.



Production line has many names, including lean pipe and coated pipe. It is generally used with lean pipe joint. Lean pipe is the basic assembly material of lean workbench, shelf and turnover car.

The production line is designed with load capacity in mind, and its strength can be increased by adding fulcrum, connecting parts, and by using double covered plastic tubes in parallel. When designing the structure, ensure that the main load is applied directly to the pipe fitting and not to the coupling. The maximum horizontal distance every 600mm (according to the specific weight to design the specific structure) can be built at will, the building block assembly method, must be supported by vertical columns and the ground, and every 1200mm, vertical columns should be directly to the ground. For castor products, the chassis shall be of double rod parallel construction. The horizontal distance is 600mm. The safe bearing capacity of a single cable rod and guide rail is 30kg.

The strength of a whole plastic cover is stronger than that of several plastic cover pipes connected by the collet string, so when the plastic cover pipe is selected, the rod must be the whole root, and the connecting rod can be segmented. The width of each column of sliding shelves (center distance) is the width of the turnover box placed +60mm; The height of each layer is the height of the turnover box +50mm.

Determine the incline Angle of the guide rail. Generally, the incline Angle of the guide rail is 5 to 8 degrees. When placing precision materials, heavy materials, and the bottom of the revolving box is smooth, the incline Angle should be smaller.

The use of lean pipe products should be carefully considered when designing them. If they do not need to be moved, they should not be designed as casters. Lean pipe products are also known as flexible, according to your site situation and customer requirements, comprehensive design scheme, flexible disassembly and assembly, no welding, practical, automobile, electronics, printing, clothing, dust-proof workshop, installation more sanitary, pollution-free.

Lean pipe workbench can adapt to the needs of modern production from time to time to improve, in line with the man-machine principle, so that the field staff operation standard, can make several people at the station of one person, the completion time is faster. At the same time, lean pipe workbench has the characteristics of light and strong, clean and wear-resistant appearance. Suitable for lean production manufacturers, for the promotion of lean production is of great help. And lean pipe workbench can be independent, can be combined, easy to adjust, can be designed and assembled according to the needs of the operation.



Precautions for use of lean pipe workbench:

1. Pay attention to cleaning during the use of lean pipe workbench.

2. Don't crash and crash into lean pipe workbench, and move and unload lean pipe workbench gently during use.

3. Do not stand on the lean pipe workbench or allow it to accept weight beyond its rated load bearing capacity.

4. Lean pipe workbench should be placed on relatively flat ground and relatively dry environment.

5. Do not place sharp or sharp tools or objects. The surface of the lean pipe workbench is smooth and clean, so as not to scratch the desktop of the lean pipe workbench.

6. Do not often assemble, once the lean pipe workbench is assembled. In this way, it is easy to cause the instability of the lean pipe workbench and reduce the service time of the lean pipe workbench.

7. Do not place acidic and oily objects on the surface of the lean pipe workbench, so as not to corrod the desktop of the lean pipe workbench and affect its normal use.

Lean tube workstation is a kind of workstation that uses 28mm diameter lean pipe (plastic pipe) with a wide range of connectors, and according to the operation needs to install the panel, row and other applications assembled workstations.



Lean tube workstation can be independent, can be combined, easy to adjust, according to the operation needs of the freedom to design and assembly. For a variety of industries testing, maintenance and product assembly; the use of wire bar table allows factories to be more tidy, easier production arrangements, logistics more fluid.

Lean tube workstation can meet the continuous improvement of modern production needs, in line with man-machine principle, the field staff to operate standards and comfort, the concept of the environment and the rapid realization of the creative. At the same time it has a light, strong, clean and wear-resistant surface characteristics.