How to assemble a workbench with lean pipe fittings?

The wire rod workbench is a modular workbench designed with a core system that utilizes standard flexible wire rods (Lean tubes) with an outer diameter of 28mm, along with specialized wire rod connectors (such as clamps and joints) for assembly. This type of workbench features reusability and easy modification.

Assembly steps
Planning and Preparation

**Design Drawings**: First, form an image of the workbench in your mind, sketch a rough diagram, and define the dimensions, structure, and functions of the workbench.
**Preparation of Materials**: Based on the drawings, prepare the corresponding lengths and quantities of wire rod tubes (common lengths include 30cm, 45cm, 60cm, 90cm, 1.2m, 1.5m, 2m, 2.5m, 3m, 4m, etc.) and the required wire rod connectors (such as T-joints, cross joints, double-end clamps, etc.). The price of wire rod connectors varies depending on type and material, ranging approximately from ¥0.86 to ¥8.64.

Cutting pipes

Use a professional manual cutter to cut the rod pipe, ensuring the cut is perpendicular. After cutting, be sure to remove the burrs from the pipe cut with a file to prevent hand injuries or interference with the installation of subsequent connectors.
Assembly frame

**Fabricating the Support Legs**: First, create the front and rear support legs of the workbench. Install the connectors onto the tubing, then form two front legs and two rear legs. Ensure they are properly positioned before bonding and securing them in place.
Connecting legs: Use pipes to connect and bond the front and rear legs, forming the basic framework of the workbench. During assembly, ensure the correct orientation of the joints and work on a flat surface to prevent joint rotation.
Installation of Countertops and Accessories

Attach the board support joints to the four corners of the frame for placing the tabletop. The tabletop should be pre-cut to the correct dimensions and then positioned on the frame.
Based on the functional requirements of the workbench, accessories such as drawers, electric screwdriver slots, process flow guides, and lighting systems can be added

Materials and Tools List
**Main Materials**: Flexible line rods (Lean Tube) with an outer diameter of 28mm, and line rod connectors (clamps, joints).
Auxiliary Tools: Professional lean tube manual cutter, file, marker pen, etc.
Precautions
All wire rod workbenches are non-standard equipment with no fixed specifications, allowing flexible design and assembly based on actual needs.
During assembly, ensure all connecting components are properly installed and securely bonded to guarantee the workbench's stability and load-bearing capacity.
We hope this information helps you successfully assemble the rod workbench! If you have any specific questions about any step, feel free to ask.