Line Rod Lean Tube has another name, it is multiple-unit tube. There are 3 materials in industry: wire rod, stainless steel tube, aluminum alloy lean tube. We can also call them, which are the first generation, the second generation, the third generation lean tube in industry. Today I will emphatically introduce everyone about standard of bearing strength of line rod lean tube. It is convenient to everybody has data reference to purchase lean tube and organize bench car finished products.



　　The standard of the first generation and the second generation lean tube strength data test.

　　Condition: the first, the two sides of tube should fix and apply a concentrated load at the arrow. The second, tube strength is including internal dimensions of fittings.

　　Recommend to use: the bending height of the middle part of the material is 5/1000 of the length of the pipe.

　　Limit load: the load on which the pipe begins to undergo plastic deformation.

　　When the recommended load is exceeded, please control the load within 80% of the limit load.

　　When the sliding load of the connector is less than the recommended service load and the limit service load, mark the sliding load of the connection. (Green)

　　The third generation lean pipe strength data monitoring standard.

　　Conditions: the first, both ends of the pipe are fixed, and a concentrated load F is applied at the arrow. The second, the length of the pipe shall be the internal size including the connector.

　　Recommended load: a load whose bending height of the middle part of the pipe is 5/1000 of the length of the pipe.

　　Limit load: the load on which the lean pipe begins to undergo plastic deformation.

　　When exceeding the recommended load, please control the load within 80% of the limit load.

　　When the sliding load of the connector is less than the recommended load and the limit load, the sliding load of the connector shall be marked. (Green)

　　Description:

　　The aluminum pipe is a new product that has appeared on the market in recent years.

　　It is a 6005T6 series aluminum alloy lean pipe， which developed based on the composite pipe and made of aluminum alloy material by high temperature and high- pressure extrusion molding process.

　　The pipe has a strong carrying capacity and stable product performance, it mainly used in the rapid assembly of the assembly line and lean production equipment.

　　The application of the aluminum tube 'Kaizen' pipe racking system in the field of the lean tube, which is a major innovation in the field of the lean pipe.

　　Features：

　　1. Environmental protection, simplicity, speed, and low cost. It also meets the 'Kaizen' pipe racking system, JIT production model. And a flexible pipe racking system can improve work efficiency.

　　2. It is ergonomic and convenient to adjust the height of the flexible pipe racking system appliance.

　　Such as workbenches, material turnover vehicles, shelves, unpowered assembly line and lean production equipment, etc.

　　Advantage :

　　1. Aluminum pipe material is light and rigid, strong load-bearing capacity, anti-corrosion, and anti-rust.

　　2. There are various types of aluminum wire rod connectors, which are easy to be assembled, convinent, and beautiful.

　　3. Representative of modern flexible production lines, the assembly efficiency has been greatly improved compared with the previous ordinary pipe of products.

　　Appliances：

　　1. Used for flexible production line materials, packaging production lines, flexible pipe racking system, and workstation application.

　　2. The use of workbenches in each production line and the use of sorting products.

　　3. Supermarket merchandise display racks, personalized display racks.

　　4. Multi-layer material loading vehicles, temporary storage vehicles, and specially designed mobile devices.

　　5. Use of storage shelves, medium, and light multi-layer shelves.

　　6. 'Kaizen' pipe racking system.