Movable hinge,connector, is used for two pcs of aluminum profile connected by the two end face, it is fixed by bolt and nut.The movable connector does not require any machining, making it a cost-effective fastening option. It can make 2 pcs of aluminum profile connected in a movable angle.

The 3 way - squared corner connector is an external fastening method that is typically used to create a corner connection between three profiles. It is a heavy-duty connection that is simple to use and provides a polished look. The 3 way - squared corner connector requires an end tap machining service on the mating profiles.

The 135° aluminum profile connector provides a 135 degree hidden corner connection. The corner code comes with set screws that allow for quick, easy connections. This connection can be between the inside of two profiles or between the inside of one profile and the inside of the second profile. The turnig corner connector does not require any machining, making it a cost-effective fastening option. The suggested tool to tighten the included hardware is a 2.5mm hex wrench.

The 90° aluminum profile connector provides a 90 degree hidden corner connection. The corner code comes with set screws that allow for quick, easy connections. This connection can be between the inside of two profiles or between the inside of one profile and the inside of the second profile. The turnig corner connector does not require any machining, making it a cost-effective fastening option. The suggested tool to tighten the included hardware is a 2.5mm hex wrench.

The 45° aluminum profile connector provides a 45 degree hidden corner connection. The corner code comes with set screws that allow for quick, easy connections. This connection can be between the inside of two profiles or between the inside of one profile and the inside of the second profile. The turnig corner connector does not require any machining, making it a cost-effective fastening option. The suggested tool to tighten the included hardware is a 2.5mm hex wrench.

The turning angle aluminum profile connector provides a 90 degree hidden corner connection. 4040 it is means this size is used for 40 series aluminum profile.The corner code comes with set screws that allow for quick, easy connections. This connection can be between the inside of two profiles or between the inside of one profile and the inside of the second profile. The turnig corner connector does not require any machining, making it a cost-effective fastening option. The suggested tool to tighten the included hardware is a 2.5mm hex wrench.

The turning angle aluminum profile connector provides a 90 degree hidden corner connection. 3030 it is means this size is used for 30 series aluminum profile.The corner code comes with set screws that allow for quick, easy connections. This connection can be between the inside of two profiles or between the inside of one profile and the inside of the second profile. The turnig corner connector does not require any machining, making it a cost-effective fastening option. The suggested tool to tighten the included hardware is a 2.5mm hex wrench.

The turning angle aluminum profile connector provides a 90 degree hidden corner connection. 2020 it is means this size is used for 20 series aluminum profile.The corner code comes with set screws that allow for quick, easy connections. This connection can be between the inside of two profiles or between the inside of one profile and the inside of the second profile. The turnig corner connector does not require any machining, making it a cost-effective fastening option. The suggested tool to tighten the included hardware is a 2.5mm hex wrench.

The 4040 bracket/Gusset is an external fastening method that creates a 90 degree connection. 4040 means this size is used for 40 series aluminum profile with a quick connection by bolt and nut. It is a lightweight bracket that requires no machining services and can provide infinite positioning along the profile T-slot, allowing a large degree of adjustability. It is a fastening method that can be repositioned and reused.

The 3030 bracket/Gusset is an external fastening method that creates a 90 degree connection. 3030 means this size is used for 30 series aluminum profile with a quick connection by bolt and nut. It is a lightweight bracket that requires no machining services and can provide infinite positioning along the profile T-slot, allowing a large degree of adjustability. It is a fastening method that can be repositioned and reused.

The 2020 bracket/Gusset is an external fastening method that creates a 90 degree connection. 2020 means this size is used for 20 series aluminum profile with a quick connection by bolt and nut. It is a lightweight bracket that requires no machining services and can provide infinite positioning along the profile T-slot, allowing a large degree of adjustability. It is a fastening method that can be repositioned and reused.

4080B is a 4.00x8.00 CM fractional 40 series square extrusion T-slot profile with two side open T-slots, each side with 4.00cm face, two side with 8.00cm face. The profile has align-a-grooves to assist in aligning connecting profiles. The 4080 profile is compatible with all 40 series fasteners and accessories. This profile lends itself to machine guards, sound enclosures, work benches, panel mount racks and displays. The T-slots enable access from any direction and are useful for mounting accessories.