This picture is made of 1.0 stainless steel (SUS201) .Model: GLTXX-V-X006X
The Lean-improvement pipe racking system can be easily converted, added, expand the application does not have borders. Lean manufacturing and improvement appropriate instrument.
Do not have a similarly flexible, easy to alter, universal, easy to install and inexpensive system! By using the most flexible storage system can be constructed.
First, existing problems.
Production is not coordinated, resulting in more labor hiring, production benefit is not high;
Production equipment management system is not complete, resulting in improper use of staff (storage).
Unreasonable arrangement of production line, resulting in waste of human resources.
1. The material box is used up, and the box needs to be gradually reduced.
2. The operator steps on the pedal and the rotating table sinks, and the empty box automatically slides out.
3. The operator releases the pedal, the rotating table automatically rises due to the lever principle, and the material box loses its obstruction and automatically slides out again.
4. The platform returns to its original position, and the operator waits for the next empty box to slide out.
Our commonly used aluminum pipe diameter is generally OD 28mm. In fact, aluminum pipe size is far more than these. There are 5 kinds of customized sizes in mold opening alone. Today I'm going to introduce you to one of them:
The diameter of this model is 27.9mm. If you don't use calipers, you can't see the difference with 28mm. Its wall thickness is 1.6-1.7mm, which is relatively thick for lean pipes. It can also be fitted with ordinary aluminium pipe fittings.
With the development of the industry, aluminum pipes are also used more widely, the major factories are more strict requirements for its material, so SUNQIT aluminum pipe lean tube is also very popular in the industry. If there are any other problems, welcome to consult!