This picture is made of aluminum tube .Model: GLTXX-K-X016X
1. The material box is used up, and the box needs to be gradually reduced. 2. The operator steps on the pedal and the rotating table sinks, and the empty box automatically slides out. 3. The operator releases the pedal, the rotating table automatically rises due to the lever principle, and the material box loses its obstruction and automatically slides out again. 4. The platform returns to its original position, and the operator waits for the next empty box to slide out.
1. Before installation and construction, be familiar with the drawings and prepare a detailed construction plan for special or complex installation. Know the transportation road and power supply on the installation site in advance. 2. Before the installation of lean pipe shelves, the on-site roofing and internal painting projects shall be basically completed, the relevant foundation floor and trench shall be completed, and the concrete strength shall not be less than 75% of the design strength; The installation site and nearby debris, garbage, etc., should be cleaned up. 3. Perform a self-check. 4. Operate according to the specification of "Lean pipe shelf Assembly Drawing".
Lean pipe has been widely used in the world. Its outer layer has plastic coating layer, the middle is a metal layer, and the inner layer is an anti-rust layer. This kind of lean pipe has low cost, but strong practicability, and it is an essential basic material for logistics industry and manufacturing industry.
Double empty container recycling material rack adopts the third generation of aluminum alloy tube and lean tube accessories, consists of two layers, the total is that we often see the performance at the bottom of the empty containers unpowered recycling equipment, but on the top floor, with the method of cylinder, to realize automatic container Angle rotation, holding hands at the same time, the way of realization of empty container automatically rise and recycling.