Request a quote
workbench
Position: HomeProductworkbench
  • Workbench F (without laminate-with caster)
  • Workbench F (without laminate-with caster)

Workbench F (without laminate-with caster)

This picture is made of L=1000mm aluminum tube.
Model: GLTXX-K-X048X（L=800mm)/ GLTXX-K-X049X（L=1000mm)/ GLTXX-K-X050X（L=1200mm）

Consult
Email
service@szsunqit.com

Product Description

Made by aluminum pipe and joint ，also can be made of other pipe materials.

01
The workbench is designed with leggings to realize the adjustable function of the workbench and supports two modes of standing work or sitting work.
02
The bottom of the workbench adopts the combination of casters and foot cups to increase the stability of the workbench and easy for fast movement.
03
Independent design of Independent design of electric circuit and gas circuit, safe and convenient to use, and can realize fast line assembly and line change;
04
SOP、 Warning lights, etc. to improve the level of on-site visual management.






Product Show and Size


Workbench F (without laminate-with caster)

Product Show

Workbench F (without laminate-with caster)

Product Size

Online Message

Related Product

45° strengthening joint

45° strengthening joint

The armrest joint

The armrest joint

8080R Foot cup plate

8080R Foot cup plate

4040 European standard profile capping

4040 European standard profile capping

Article Recommendation

16 2022-03
How to install lean pipe shelves ？

How to install lean pipe shelves ？

​1. Before installation and construction, be familiar with the drawings and prepare a detailed construction plan for special or complex installation. Know the transportation road and power supply on the installation site in advance. 2. Before the installation of lean pipe shelves, the on-site roofing and internal painting projects shall be basically completed, the relevant foundation floor and trench shall be completed, and the concrete strength shall not be less than 75% of the design strength; The installation site and nearby debris, garbage, etc., should be cleaned up. 3. Perform a self-check. 4. Operate according to the specification of "Lean pipe shelf Assembly Drawing".

06 2021-12
AGV platform

AGV platform

The AGV platform is a multi-functional AGV platform independently developed by The LCIA r&d team of SUNQIT. The shell part of the AGV can be easily combined with the lean tube, two-way drive, ultrasonic induction, and high security.

15 2022-04
How many specifications are there for aluminum pipe?

How many specifications are there for aluminum pipe?

Our commonly used aluminum pipe diameter is generally OD 28mm. In fact, aluminum pipe size is far more than these. There are 5 kinds of customized sizes in mold opening alone. Today I'm going to introduce you to one of them: The diameter of this model is 27.9mm. If you don't use calipers, you can't see the difference with 28mm. Its wall thickness is 1.6-1.7mm, which is relatively thick for lean pipes. It can also be fitted with ordinary aluminium pipe fittings. With the development of the industry, aluminum pipes are also used more widely, the major factories are more strict requirements for its material, so SUNQIT aluminum pipe lean tube is also very popular in the industry. If there are any other problems, welcome to consult!

18 2021-12
LCIA--Low Cost Intelligent Automation

LCIA--Low Cost Intelligent Automation

The concept of pipe and joint systems came to our attention some years ago when we were dealing with the philosophy of Lean Production. We initially distributed the products of a major European manufacturer and were very successful in Germany, Austria and Japanese. The market potential far exceeded that of any other product in our range. After working with several suppliers and seeing the weaknesses within these, we decided in 2005 to launch our own product: LCIA--lean pipe flexible and low-cost automatiom system.

Message

Close