Request a quote
workbench
Position: HomeProductworkbench
  • Workbench E (single deck-with caster)
  • Workbench E (single deck-with caster)

Workbench E (single deck-with caster)

This picture is made of L=1000mm aluminum tube.
Model: GLTXX-K-X036X（L=800mm)/ GLTXX-K-X037X（L=1000mm)/ GLTXX-K-X038X（L=1200mm）

Consult
Email
service@szsunqit.com

Product Description

Made by aluminum pipe and joint ，also can be made of other pipe materials.

01
The workbench is designed with leggings to realize the adjustable function of the workbench and supports two modes of standing work or sitting work.
02
The bottom of the workbench adopts the combination of casters and foot cups to increase the stability of the workbench and easy for fast movement.
03
Independent design of Independent design of electric circuit and gas circuit, safe and convenient to use, and can realize fast line assembly and line change;
04
SOP、 Warning lights, etc. to improve the level of on-site visual management.






Product Show and Size


Workbench E (single deck-with caster)

Product Show

Workbench E (single deck-with caster)

Product Size

Online Message

Related Product

6630 National standard profile capping

6630 National standard profile capping

4040R National standard profile capping

4040R National standard profile capping

Turnover Car C

Turnover Car C

Adjustable buffer kit 2

Adjustable buffer kit 2

Article Recommendation

26 2021-10
How to design the drawing of lean pipe workbench?

How to design the drawing of lean pipe workbench?

In the industry, the procurement of lean pipe workbench generally needs customization, because the application environment is different, so the drawings of lean pipe workbench should be designed in advance. Lean tube workbench design is not very difficult. Sunqirt has 13 years of industry experience for you to do a simple analysis!

18 2022-01
Traveling Brake Turnover trolley

Traveling Brake Turnover trolley

Model：GLLXX-L-1006X The linkage between the spring and the brake module realizes the self-brake function of the turnover trolley when it is stopped. As long as the turnover car is pushed, the brake module is lifted, and the trolley can be moved easily. 1.The operator presses the handle, the brake module is lifted, and starts to push the turnover cart for operation. 2.The operator stops moving the turnover cart, releases the handle brake module to return, and the bottom casters rub the ground to brake. The operator continues to push the turnover cart, the brake module is lifted again, and the turnover cart can be moved easily.

21 2021-12
The composition of the workbench

The composition of the workbench

1. The workbench is designed with leggings to realize the adjustable function of the workbench and supports two modes of standing work or sitting work. 2. The bottom of the workbench adopts the combination of casters and foot cups to increase the stability of the workbench and easy for fast movement. 3. Independent design of electric circuit and gas circuit, safe and convenient to use, and workbench can realize fast line assembly and line change; 4.SOP、 Warning lights improve the level of on-site visual management.

16 2022-03
How to install lean pipe shelves ？

How to install lean pipe shelves ？

​1. Before installation and construction, be familiar with the drawings and prepare a detailed construction plan for special or complex installation. Know the transportation road and power supply on the installation site in advance. 2. Before the installation of lean pipe shelves, the on-site roofing and internal painting projects shall be basically completed, the relevant foundation floor and trench shall be completed, and the concrete strength shall not be less than 75% of the design strength; The installation site and nearby debris, garbage, etc., should be cleaned up. 3. Perform a self-check. 4. Operate according to the specification of "Lean pipe shelf Assembly Drawing".

Message

Close