Request a quote
workbench
Position: HomeProductworkbench
  • Workbench A (without laminate-without caster)
  • Workbench A (without laminate-without caster)

Workbench A (without laminate-without caster)

This picture is made of ordinary black PE 1.2mm diameter composite pipe.
Model: GLTXX-K-X001X（L=800mm)/ GLTXX-K-X002X（L=1000mm)/ GLTXX-K-X003X（L=1200mm）

Consult
Email
service@szsunqit.com

Product Description

Made by aluminum pipe and joint ，also can be made of other pipe materials.

01
The workbench is designed with leggings to realize the adjustable function of the workbench and supports two modes of standing work or sitting work.
02
The bottom of the workbench adopts the combination of casters and foot cups to increase the stability of the workbench and easy for fast movement.
03
Independent design of Independent design of electric circuit and gas circuit, safe and convenient to use, and can realize fast line assembly and line change;
04
SOP、 Warning lights, etc. to improve the level of on-site visual management.






Product Show and Size


Workbench A (without laminate-without caster)

Product Show

Workbench A (without laminate-without caster)

Product Size

Online Message

Related Product

Deep groove of supporting plate on roller φ 8

Deep groove of supporting plate on roller φ 8

Roller lower supporting plate φ 12

Roller lower supporting plate φ 12

Tray fixing joint

Tray fixing joint

45° Fixed Joint

45° Fixed Joint

Article Recommendation

21 2021-12
The composition of the workbench

The composition of the workbench

1. The workbench is designed with leggings to realize the adjustable function of the workbench and supports two modes of standing work or sitting work. 2. The bottom of the workbench adopts the combination of casters and foot cups to increase the stability of the workbench and easy for fast movement. 3. Independent design of electric circuit and gas circuit, safe and convenient to use, and workbench can realize fast line assembly and line change; 4.SOP、 Warning lights improve the level of on-site visual management.

18 2021-12
LCIA--Low Cost Intelligent Automation

LCIA--Low Cost Intelligent Automation

The concept of pipe and joint systems came to our attention some years ago when we were dealing with the philosophy of Lean Production. We initially distributed the products of a major European manufacturer and were very successful in Germany, Austria and Japanese. The market potential far exceeded that of any other product in our range. After working with several suppliers and seeing the weaknesses within these, we decided in 2005 to launch our own product: LCIA--lean pipe flexible and low-cost automatiom system.

29 2022-04
Installation and composition characteristics of the precision pipeline?

Installation and composition characteristics of the precision pipeline?

Lean pipe assembly line is a necessary item for lean production. The most basic feature of lean pipe assembly line is that it can be disassembled and assembled at will to maximize the unnecessary waste of working hours and maximize the production benefits per unit of time. With lean pipe and lean pipe joint and a series of accessories, we can assemble any lean pipe assembly line we want to maximize production efficiency.

08 2022-03
Lean pipe assembly line workbench principles

Lean pipe assembly line workbench principles

Lean pipe equipment general assembly of principles and theories to the side with the film after the assembly line workbench. First the install assembly line workbench bearing pipe with two ends before they are installed in the middle. All between chuck and can are installed according to the requirements of design to ensure that each clamp screw in place. Can't use hard and chuck can hammer. To ensure the perpendicular to the ground when packed column. In order to avoid the uneven force of the whole wire rod frame to cause damage note: When cutting the plastic tube, pay attention to the deformation of plastic tube cutting. There may be special purpose members, such as insert frame, hook, etc., which need to be processed and configured.

Message

Close