Request a quote
Trophy foot
Position: HomeProductCaster and trophy footTrophy foot
  • Plastic Anchor A
  • Plastic Anchor A
  • Plastic Anchor A

Plastic Anchor A

Model：GLTXX-F-1006X /GLTXX-F-1007X
Material：Carbon steel + Plastic
Weight：47 g/set
Application：Commonly used for composite pipe workbench, shelf ground support

Consult
Email
service@szsunqit.com

Product Size and Three-dimensional representation

Plastic Anchor A

Product size

Plastic Anchor A

Three-dimensional representation

Online Message

Related Product

3060R National Standard Profile

3060R National Standard Profile

40L Connecting plate

40L Connecting plate

H-11 Monolithic

H-11 Monolithic

60 Sheet Metal Fluency Bar (small wheel)

60 Sheet Metal Fluency Bar (small wheel)

Article Recommendation

27 2021-10
How many meters a lean pipe?

How many meters a lean pipe?

Lean pipe standard length: Lean pipe is mainly used in the field of lean manufacturing equipment. The outer diameter of lean pipe is 28mm, and the inner diameter of pipe wall is usually 0.8/1.0/1.2 thick. The standard length of 4 meters is also recognized by everyone. The 4 meter conclusion is valid.

15 2022-04
How many specifications are there for aluminum pipe?

How many specifications are there for aluminum pipe?

Our commonly used aluminum pipe diameter is generally OD 28mm. In fact, aluminum pipe size is far more than these. There are 5 kinds of customized sizes in mold opening alone. Today I'm going to introduce you to one of them: The diameter of this model is 27.9mm. If you don't use calipers, you can't see the difference with 28mm. Its wall thickness is 1.6-1.7mm, which is relatively thick for lean pipes. It can also be fitted with ordinary aluminium pipe fittings. With the development of the industry, aluminum pipes are also used more widely, the major factories are more strict requirements for its material, so SUNQIT aluminum pipe lean tube is also very popular in the industry. If there are any other problems, welcome to consult!

08 2022-03
Lean pipe assembly line workbench principles

Lean pipe assembly line workbench principles

Lean pipe equipment general assembly of principles and theories to the side with the film after the assembly line workbench. First the install assembly line workbench bearing pipe with two ends before they are installed in the middle. All between chuck and can are installed according to the requirements of design to ensure that each clamp screw in place. Can't use hard and chuck can hammer. To ensure the perpendicular to the ground when packed column. In order to avoid the uneven force of the whole wire rod frame to cause damage note: When cutting the plastic tube, pay attention to the deformation of plastic tube cutting. There may be special purpose members, such as insert frame, hook, etc., which need to be processed and configured.

23 2021-12
What is the composite pipe?

What is the composite pipe?

Like other pipes, the composite pipe is made up of several layers, usually including at least one thermoplastic liner, reinforcing middle layers and an outer thermoplastic protective jacket. Due to its flexibility, a flexible composite pipes can be spooled onto a reel for efficient transportation and fast installation without the need for as many connections.

Message

Close