Request a quote
News
Position: HomeNews
How many specifications are there for aluminum pipe?
2022-04-15

How many specifications are there for aluminum pipe?

Our commonly used aluminum pipe diameter is generally OD 28mm. In fact, aluminum pipe size is far more than these. There are 5 kinds of customized sizes in mold opening alone. Today I'm going to introduce you to one of them:
The diameter of this model is 27.9mm. If you don't use calipers, you can't see the difference with 28mm. Its wall thickness is 1.6-1.7mm, which is relatively thick for lean pipes. It can also be fitted with ordinary aluminium pipe fittings.
With the development of the industry, aluminum pipes are also used more widely, the major factories are more strict requirements for its material, so SUNQIT aluminum pipe lean tube is also very popular in the industry. If there are any other problems, welcome to consult!

What are the uses of casters?
2022-04-06

What are the uses of casters?

First, casters can be divided into:

Automobile industry casters, medical casters, food industry casters, textile industry casters, furniture casters, shopping cart casters, airport industry casters and so on, industrial casters are very widely used.

How to install lean pipe shelves ？
2022-03-16

How to install lean pipe shelves ？

​1. Before installation and construction, be familiar with the drawings and
prepare a detailed construction plan for special or complex installation. Know the transportation road and power supply on the installation site in advance.
2. Before the installation of lean pipe shelves, the on-site roofing and internal painting projects shall be basically completed, the relevant foundation floor and trench shall be completed, and the concrete strength shall not be less than 75% of the design strength; The installation site and nearby debris, garbage, etc., should be cleaned up.
3. Perform a self-check.
4. Operate according to the specification of "Lean pipe shelf Assembly Drawing".

Industrial lean pipe rack
2022-03-15

Industrial lean pipe rack

Industrial lean pipe rack bearing capacity, not easy to deformation (such as item card solid technology using high card solid force to ensure the stability of the structure, to prevent the distortion of seamless conduit), easy disassembly, strong compatibility (such as item section 6 series groove rail used in section 6 series D28, The components of item MB Building system are ideally compatible), beautiful in appearance, wear-resistant, rust-free and reusable. To meet the modern enterprise low cost, low loss, high efficiency of logistics supply chain management needs.

Lean pipe assembly line workbench principles
2022-03-08

Lean pipe assembly line workbench principles

Lean pipe equipment general assembly of principles and theories to the side with the film after the assembly line workbench. First the install assembly line workbench bearing pipe with two ends before they are installed in the middle. All between chuck and can are installed according to the requirements of design to ensure that each clamp screw in place. Can't use hard and chuck can hammer. To ensure the perpendicular to the ground when packed column. In order to avoid the uneven force of the whole wire rod frame to cause damage note: When cutting the plastic tube, pay attention to the deformation of plastic tube cutting. There may be special purpose members, such as insert frame, hook, etc., which need to be processed and configured.

How does lean pipeline system provide efficiency?
2022-05-06

How does lean pipeline system provide efficiency?

Lean pipeline system simply refers to the route through which products are produced. That is from the raw material into the production site, through processing, transportation, assembly, inspection and a series of assembly line activities formed by the route. At the same time, it is also a form of production organization to complete the product process. So how do we lean on the assembly line to provide efficiency?

12345...

Hot News

Latest News

Tag Cloud

Message

Close